SR_Ignitors-aims

Sulphur Recovery Ignitors

AIMS Represents Durag Group

Electronic ignitors ignite oil and gas burners of any capacity in industrial applications and power plants.

The energy required for ignition of the burner is stored in a high-voltage capacitor in the device. The energy is then switched to the igniter tip via a wear-resistant electronic switch. The resulting spark discharge at the igniter tip will ignite the fuel. For reliable ignition during the start phase, the igniter delivers 20 sparks/s for 60 seconds and then switches down to 5 sparks/s (D-HG 400). When the operating voltage is switched on, the igniter will automatically begin to spark. The ignition function of the igniter is signalled via an LED and the potential-free contacts of the igniter acknowledgment relay.

The ideal position of the igniter tip for igniting oil burners is generally at the edge of the atomizing cone directly in front of the swirler. The actual position is determined by adjusting the igniter tip axially by hand. If heavy oil is being fired, it is necessary to sufficiently preheat it to between 90°C and 130°C. In the case of gas burners, the position of the igniter tip is not of critical importance. There must, however, be a mixture of fuel and air present at this position. For a soft start, a low flow velocity (start-up position of the burner) should be set.

DURAG Spark Ignition SystemD-HG 400

D-HG 55
D-ZL
D-VE 500

SMITSVONK Spark Ignition SystemIgnition Lances for Flares

Ignition Lances for Burners
E-LIGHT 2000 Ignition Units
E-SPARK 3/6
BWO Ignition Units
SVECU Ignition Units
Portable Ignition Units
Semi Portable Ignition Units
Mobile Ignition Units

HEGWEIN Gas Fired Igniters2 kW Gas Igniters

4 kW Gas Igniters
45 kW Gas Igniters
120 kW Gas Igniters
250 kW Gas Igniters
600 kW Gas Igniters
1000 kW Gas Igniters
2000 kW Gas Igniters
2/4 kW Gas Igniters Zone 1/21
2/4 kW Gas Igniters Zone 2/22
45-600 kW Gas Igniters Zone 1
45/120 kW Gas Igniters Zone 2
250 kW Gas Igniters flexible
300 kW Gas Igniters NFPA
1000 kW Gas Igniters NFPA
6000 kW Gas Igniters NFPA
10000 kW Gas Igniters NFPA
20 kW Self Aspirated Gas Igniters
80 kW Self Aspirated Gas Igniters

HEGWEIN Oil Fired Igniters100 kW Oil Igniters

300 kW Oil Igniters
1000 kW Oil Igniters
3600 kW Oil Igniters
100/300/1000 kW Oil Igniters Zone 1
100-3600 kW Oil Igniters Zone 2

HEGWEIN Dual-Oil & Oil/Gas Igniters

1000 / 400 kW Dual Fuel Igniters
1000 / 1000 kW Dual Fuel Igniters

SMITSVONK Gas Fired IgnitersTube Ø48.3 mm – Explosion Proof

Tube Ø48.3 mm
Tube Ø54 mm – Explosion Proof
Tube Ø54 mm
Tube Ø38 mm – Explosion Proof
Tube Ø38 mm
Flame Front Generators
Flare Pilot Burners (electrical ignited)
Flare Pilot Burners (flame front ignition)

HEGWEIN Gas Burners15 kW Gas Burners

35 kW Gas Burners
35 kW Gas Burners QC
85 kW Gas Burners
200 kW Gas Burners
350 kW Gas Burners
800 kW Gas Burners
2000 kW Gas Burners
3200 kW Gas Burners
4500 kW Gas Burners